New SS12P Series Pendular Spreaders
REQUEST A QUOTE
Key Features
- Field installed agitator kit available
- Spreader spout provides precision spreading
- Drive system has anti-wear, cast-steel gearbox
- Rubber insert conversion kit keeps discharge from clogging
Features
Hopper made of anti-shock, reinforced fiberglass
Superior corrosion resistance
The reinforced fiberglass hopper on the 12 Series Pendular Spreader provides superior corrosion resistance, resulting in stronger durability and longer wear life.
It has a frame made of sturdy, tubular steel and is painted with polyester resin powder coat for added corrosion resistance.
Superior corrosion resistance
Spreader spout provides precision spreading
Standard spout
Frontier™ Pendular Spreaders are designed to provide a precise spread. To accommodate this, they can be outfitted with various spreader spouts.
The spreader spouts are made of nylon and reinforced fiberglass for corrosion resistance and increased durability.
By simply rotating the optional directional spout's tip, an easy spread adjustment can be made to the left only, to the right only, or to the middle.
Optional left/right directional attachment
Optional left/right directional attachment
Standard spout
Optional left/right directional attachment
Optional left/right directional attachment
Category 1 power take-off (PTO) driveline
Cast-steel gearbox provides extended durability
The 12 Series Pendular Spreader comes standard with a 540-rpm PTO, Category 1 driveline. Its heavy-duty shielded shaft, made in compliance with American Society of Agricultural and Biological Engineers (ASABE) requirements, is built to last and ensures operator safety.
The anti-wear, cast-steel gearbox operates in oil bath, providing a longer life and durability for the drive system.
Cast-steel gearbox provides extended durability
Field-installed agitator kits for broadcast and pendular spreaders
All the field conversion agitator kits listed below allow operators to use multiple types of seed or fertilizer without clumping up.
Spout, deflector shields, and discharge kits for broadcast and pendular spreaders
Deflector shield conversion kits for broadcast spreaders ensure that material is thrown where the operator chooses.
Side-row discharge conversion kits for broadcast spreaders focus the spread to the side of the tractor.
The left-right direction attachment concentrates material to specific areas when using pendular spreaders.
A salt and sand spout kit and an optional locking nut are also available.
Filter grate prevents damage to pendular spreaders
Filter grate drawing from operator's manual
The filter grate kit is used when loading SS1079P, SS1116P, SS1180P, and SS1220P Pendular Spreaders. It keeps hard and clumpy material from damaging parts or clogging the spreader.
Filter grate drawing from operator's manual
Hydraulic gate control kit for SS10P, SS11P, and SS12P Series Pendular Spreaders
Hydraulic gate control drawing from operator's manual
The hydraulic gate control kit is used to open and close the gate of the spreader without the operator having to get off the tractor by using the tractor's hydraulic system.
Hydraulic gate control drawing from operator's manual
Rubber insert for discharge on pendular spreaders
The field-installed rubber insert kit is used to keep the discharge from clogging.
Specifications
Dimension
| Hopper width | |
|---|---|
| Hopper loading height | 119.4 cm 47 in. |
Weight
| Hopper capacity | 1000.2 kg 2205 lb |
|---|---|
| Machine | 155.6 kg 343 lb |
| Shipping (per pair) | 195 kg 430 lb |
Hopper
| Volume capacity | 1.2 m3 42.4 cu ft |
|---|---|
| Material | Reinforced fiberglass |
PTO
| rpm | 540 rpm |
|---|---|
| Tractor hp range | 14.9-44.7 kW 20-60 hp |
| Shaft category |
Range
| Swath spread | 5.2-14.3 m 17-47 ft |
|---|
Hitch
| Type | 3-pt, Cat. 1, Cat. 2 |
|---|---|
| iMatchTM compatible |
Set-up time
| Labor hours | 0.5 hours |
|---|
Warranty
| Time period | One year |
|---|