New 610 Integral Chisel Plow
REQUEST A QUOTE
Key Features
- Offers a variety of sizes
- Implement warning lights enable safe transport
- Shovels and attaching hardware
- Sweeps and attaching hardware
Features
Offers a variety of sizes and excellent residue flow
610 Chisel Plow
The 610 Chisel Plow is available in a variety of sizes to help match tractor horsepower and work designs.
Typical percents of the residue cover that remains from the 610 are listed as follows (the percentages do not take into account variables such as the condition of the residue, speed, and soil type):
*Non-fragile residue includes crops like corn, sorghum, wheat (more than 45 bu).
**Fragile residue includes crops like soybeans, edible beans, peas, wheat (under 45 bu), sunflower, peanuts, cotton.
610 Chisel Plow|
Model |
Width |
Type of fold |
Standards |
| Three-bar integral | 2.44 m to 6.10 m (8 ft to 20 ft) | Non-fold | Rigid |
| TruPosition™ | |||
| Tru-Depth™ |
|
Starting residue cover (percent) |
Remaining non-fragile* residue cover (percent) |
Remaining fragile** residue cover (percent) |
||||
|
with 51-mm x 356-mm (2-in. x 14-in.) chisel point |
with 102-mm x 368-mm (4-in. x 14.5-in.) shovel |
with 76-mm x 610-mm (3-in. x 24-in.) shovel |
with 51-mm x 356-mm (2-in. x 14-in.) chisel point |
with 102-mm x 368-mm (4-in. x 14.5-in.) shovel |
with 76-mm x 610-mm (3-in. x 24-in.) shovel |
|
|
100 |
70 |
60 |
60 |
50 |
45 |
45 |
|
90 |
65 |
55 |
55 |
45 |
40 |
40 |
|
80 |
56 |
50 |
50 |
40 |
35 |
35 |
|
70 |
50 |
42 |
42 |
35 |
30 |
30 |
|
60 |
42 |
35 |
35 |
30 |
27 |
27 |
|
50 |
35 |
30 |
30 |
25 |
22 |
22 |
|
40 |
28 |
25 |
25 |
20 |
18 |
18 |
Strong mainframe withstands demanding field conditions
610 rigid frame
The 610 Chisel Plow features a large 102-mm x 102-mm (4-in. x 4-in.) tubular steel mainframe.
Welded construction adds the inner strength that withstands twisting and pulling through demanding field conditions.
610 rigid frame
Choice of rigid, TruPosition™, and Tru-Depth™ standards
Rigid standard
The rigid standard:
TruPosition standard
The TruPosition standard:
Tru-Depth standard
The Tru-Depth standard:
Rigid standard- Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
- Design is suited for fields having few obstructions
- Will till to 203 mm (8 in.) deep
- Good clearance to handle heavy trash
- 711-mm (28-in.) underframe
- 305-mm (12-in.) spacing
TruPosition standard- Cast pivot assembly holds shank firm while working in the soil
- Is 32 mm x 51 mm x 711 mm (1.25 in. x 2 in. x 28 in.)
- Shank is replaceable without disassembly of the standard assembly
- Trip action is suited for fields having rocks or other obstructions
- 550-lb trip 711-mm (28-in.) standard will till to 203 mm (8 in.) deep
- 711-mm (28-in.) underframe
- Trip height of 254 mm (10 in.) for good clearance
- Slotted lower hole to aid in removing ground-engaging tools
Tru-Depth standard- Cast pivot assembly holds the shank firm while working in the soil
- 51 mm x 32 mm x 813 mm (2 in. x 1.25 in. x 32 in.); edge bent for extra strength
- Designed to work in rocky ground and heavy draft conditions
- Will till to 305 mm (12 in.) deep
- Trip height of 279 mm (11 in.)
- 568-kg (1250-lb) trip force
- Excellent clearance to handle heavy trash
- 813-mm (32-in.) underframe
- 305-mm (12-in.) spacing
Implement warning lights enable safe transport
An implement warning light harness with a turn-signal module for two amber and two red lights are included as standard equipment for safe transport on roads.
The implement warning light harness requires one of the following:
-
Category 2, 3-point hitch with or without Quik-Coupler
- Category 3 and 3N, 3-point hitch with or without Quik-Coupler
Horsepower requirements
- The rigid and TruPosition™ standards require engine horsepower of 6 hp per ft to 10 hp per ft.
Specifications
Fold
| Type | Non-fold (integral) |
|---|
Working widths
| Rigid frame | Option 1 2.44 to 6.1 m 8 to 20 ft |
|---|---|
| Drawn rigid fold | |
| 3-section | |
| 5-section |
Transport width
| Rigid frame | Option 1 2.99 to 5.97 m 9.83 to 19.58 ft |
|---|---|
| Drawn rigid fold | |
| 3-section | |
| 5-section |
Transport height
| Rigid frame | |
|---|---|
| Rigid over-center fold | |
| 3-section | |
| 5-section |
Operation depth
| Maximum depth | 30.5 cm 12 in. |
|---|
Operating speed
| Miles per hour | 8 to 11.3 km/h 5 to 7 mph |
|---|
Horsepower required
| Horsepower per foot | Rigid and spring-reset standards: 14.7 to 24.5 kW/m 6 to 10 hp/ft Tru-Depth standards: 14.7 to 34.3 kW/m 6 to 14 hp/ft |
|---|
Depth control
| Option 1 | Tractor 3-point hitch |
|---|---|
| Option 2 | |
| Option 3 |
Hydraulic requirements
| Standard | |
|---|---|
| Option 1 | |
| Option 2 |
Electrical requirements
| Standard | |
|---|---|
| Option 1 | |
| Option 2 |
Frame
| Tubing | High strength, box beam steel cross members: 10.2x10.2 cm 4x4 in. Steel end tubes, welded construction: 5.1x10.2 cm 2x4 in. |
|---|---|
| Number of ranks | |
| Fore-and-aft | 182.9 cm 72 in. |
| Underframe clearance | Rigid and TruPosition™ standards: 71.1 cm 28 in. Tru-Depth: 81.3 cm 32 in. |
Standard spacings
| Inches | 30.5 cm 12 in. |
|---|
Standard options
| Option 1 | Spec 3.2x5.1x71.1 cm 1.5x2x28 in. Maximum operating depth 20.3 cm 8 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. 40.6 cm 16 in. Rigid standard |
|---|---|
| Option 2 | Spec 3.2x5.1x71.1 cm 1.25x2x28 in. Trip force 249.5 kg 550 lb Trip height 25.4 cm 10 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 71.1 cm 28 in. Spacing 30.5 cm 12 in. Standard: TruPosition |
| Option 3 | Spec 5.1x3.2x81.3 cm 2x1.25x32 in. Trip force 567 kg 1,250 lb Trip height 27.9 cm 11 in. Maximum operating depth 30.5 cm 12 in. Underframe clearance 81.3 cm 32 in. Spacing 12, 16 Standard: Tru-Depth |
| Option 4 |
Ground-engaging components
| Choices | Variety of sweeps, shovels, and chisel points |
|---|
Wheels
| Centerframe depth control wheels and tires | |
|---|---|
| Wing frame wheels and tires | |
| Stabilizer wheels | Option 1 Stabilizer wheel frames with 5.90 - 15 4PR implement tires (optional on 2.4-m [8-ft] base models, standard on 4.9-m [16-ft] base models) |
No basket harrows
| Option 1 | Rank spacing 30.5 cm 12 in. Spike/coil dimensions 30.5 cm 12 in. 3-bar coil tine |
|---|---|
| Option 2 | |
| Option 3 |
Rolling basket harrow
| Option 1 | |
|---|---|
| Option 2 | |
| Option 3 |
Rear hitch
| Tubing size | |
|---|---|
| Telescoping | |
| Tongue weight rating | |
| GVW | |
| Wiring harness for transport lights | |
| Hydraulic hoses and couplers |
Additional feature
| Opton 1 | |
|---|---|
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 |
Key Specs
| Horsepower per foot | |
|---|---|
| Maximum depth | |
| Miles per hour | |
| Standard spacings - Inches | |
| Transport width -Rigid frame | |
| Working widths - Rigid frame |