New DH16 Series Disk Harrows
REQUEST A QUOTE
Key Features
- Two-blade taper furrow filler
- Disk leveling adjustable with a crank
- Middle breaker cuts out center bulk
- Hydraulic controls raise and lower the disk
Features
Optional rolling basket for improved field conditions
Operators can add the optional 35.56-cm (14-in.) diameter rolling basket to help break up clods for improved levelness and uniformity of field finish. A wrench can be used to adjust the down pressure of the rolling basket to suit the operator’s needs.
Optional rolling basket
Two-blade taper furrow filler reduces outside ridges
A two-blade taper furrow filler on the outside rear wing reduces outside ridges and smooths out the soil to create a level soil surface.
Creates a level soil surface
Disk gangs adjust to match soil conditions
Disk gangs are easily adjustable to match changing soil conditions with Frontier™ disk harrows.
Use a more aggressive angle to tear up and penetrate high residue and soil. Reduce the angle for a smoother finish.
Adjustable disk gangs
Notched or spherical blades
Choose notched or spherical blades with cast spools for the Frontier™ DH15 and DH16 Series Disk Harrows.
Notched blades aggressively cut and mulch, while spherical (smooth) blades slice and mix residue for a smoother finish.
There are three blade configurations:
Notched blades for aggressive cutting
Spherical blades slice and mix for a smooth finish
-
Front notched gang and rear spherical gang
-
Spherical blades only
-
Notched blades only
Disk leveling adjustable with a crank
Crank adjustment for front-to-rear leveling on the Frontier™ disk harrow lets the operator easily fine-tune disk leveling to avoid ridges and valleys in varying soil types and field conditions.
The working depth is controlled with the depth control bar. Simply lock the pin in one of the seven positions for the working depth required.
Crank adjustment
Middle breaker cuts out center bulk for level soil profile
The middle breaker cuts out the center bulk for a more level soil profile, ensuring complete coverage on each pass.
Middle breaker
Hydraulic controls raise and lower the disk on the go
The Frontier™ DH15 Series Disk Harrow hydraulic controls let the operator raise and lower the disk while on the go. Safety chains come standard with all models.
Hydraulic controls
Scraper field conversion kit for furrow fillers
For all DH15 and DH16 Series Disks
The scraper kit for furrow fillers – two per kit – removes soil buildup from furrow fillers in wet, sticky soil types.
Scraper field conversion kits for DH16 Series Disks
The scraper kit removes soil buildup from disk blades in wet, sticky soil types.
Furrow filler field-installed kits for DH12, DH13, DH15, and DH16 Series Disks
Furrow filler field-installed kits provide an additional smaller-diameter disk blade to the outside of each rear gang, helping to fill in the furrow left by the outermost disk blade.
Field-installed middle breaker kit for disks
The middle breaker removes the center balk of dirt left between the front disk gangs.
Specifications
Dimensions
| Working width | 3.2 m 10.6 ft |
|---|
Weight
| Operating | 1898-2200 kg 4185-4851 lb |
|---|---|
| Shipping | 1989-2291 kg 4385-5051 lb |
Tractor requirements
| Horsepower range | 45-60 kW 60-80 hp |
|---|
Hitch
| Type | Level lift drawn with clevis |
|---|---|
| Category | |
| Quick coupler compatibility |
Blade
| Spacing | Front 22.9 cm 9 in. Rear 22.9 cm 9 in. 22.9 cm 9 in. |
|---|---|
| Size | 56 cm 22 in. |
| Thickness | 4.5 mm 0.177 in. |
| Quantity | 28 |
| Type | Notched (front) / Notched (rear) Available Smooth (front) / Smooth (rear) Standard Notched (front) / Smooth (rear) Available Weight per blade: 68-76 kg 149-173 lb |
Gang axle
| Diameter | 38 mm 1.5 in. |
|---|---|
| Type | Square |
| Material | C1045 |
Gang angles
| Front | 5, 8, 9, 11, 13, 14, 16, 18, 19, 22, 25 degree (angle) |
|---|---|
| Rear | 5, 8, 10, 12, 13, 14, 16, 17, 19, 20, 21, 24 degree (angle) |
Tubing
| Frame | 101.6x101.6x6.4 and 152.4x101.6x6.4 mm 4x4x0.25 and 6x4x0.25 in. |
|---|---|
| Gang | 101.6x101.6x6.4 mm 4x4x0.25 in. |
Bearing hanger
| Material | Steel (Rigid Standard - C-Spring Optional) |
|---|---|
| Size | 50.8x101.6 2x4 in. |
| U-bolt size | 19.1 mm 0.75 in. |
| Bearing type | Lubricated ball bearings |
Depth control
| Type | Pin adjust, center mount |
|---|
Lighting and safety
| Transport lights | Standard |
|---|---|
| Safety chain | Standard |
| Jack | Standard |
Hydraulics
| Cylinder size | 10.1x20.3 cm 4x8 in. |
|---|---|
| Hose length | 406 cm 160 in. |
Tires
| Type | Pneumatic |
|---|---|
| Size | Dual 9.5L-15 6 ply |
Set-up time
| Labor hours | 4 |
|---|
Warranty
| Time period | 1 year |
|---|