New 22B Integral Ripper
REQUEST A QUOTE
Key Features
- Regular and capped ripper points
- LaserRip™ Extreme points
- Mole ball is used to make a tunnel drainage system
- Heavy-duty knife
Features
- Curved standard is less likely to slice through marginally moist soils than a straight standard
- Mole ball can be attached to the standard to help drain wet soils by leaving a small tunnel under the soil
- V-knife can be attached to the standard to effectively cut the root systems
- Improves water percolation into the subsoil zone
- 25 mm x 686 mm (1 in. x 27 in.)
- Maximum working depth of 406 mm (16 in.)
- 32 mm x 838 mm (1.25 in. x 33 in.)
- Maximum working depth of 559 mm (22 in.)
- 25-mm x 686-mm (1-in. x 27-in.) standard model is compatible with Category 1, 3-point hitch tractors.
- 32 mm x 838 mm (1.25 in. x 33-in.) standard model is compatible with Category 2 or 2/3N tractors with or without Quik-Coupler
- 16.9-30 or larger rear tractor tires are recommended
Specifications
| Working width | |
|---|---|
| Transport width | |
| Operating depth |
Maximum 406 to 559 mm 16 to 22 in. |
| Miles per hour | |
| Horsepower per standard |
With 3‑point hitch: 53 to 165 engine kW 39.5 to 123 engine hp |
| Spacings |
| Type | V‑ripper |
|---|---|
| Option 1 | Integral ripper |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 |
| Option 1 | |
|---|---|
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 |
| Option 1 | |
|---|---|
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 |
| Maximum | 406 to 559 mm 16 to 22 in. |
|---|
| Size | |
|---|---|
| Maximum underframe clearance |
| Horsepower per standard |
With 3‑point hitch: 53 to 165 engine kW 39.5 to 123 engine hp |
|---|
| Option 1 | |
|---|---|
| Option 2 | |
| Option 3 |
| Option 1 | |
|---|---|
| Option 2 |
| Options | |
|---|---|
| Three-point hitch requirements |
Category 1, 2, or 3/N without Quik‑Coupler for standard: 686 mm 27 in. Category 2 or 2/3N with or without Quik‑Coupler for standard: 838 mm 33 in. 16.9‑30 or larger rear tractor tires are recommended |
| Pull-type description |
| Spacings | |
|---|---|
| Option 1 |
Standard type Parabolic Standard: 32×686 mm 1.25×27 in. Penetration: 406 mm 16 in. |
| Option 2 |
Standard type Parabolic Optional: 32×838 mm 1.25×33 in. Penetration: 559 mm 22 in. |
| Option 3 | |
| Option 4 |
| Description | |
|---|---|
| Type | |
| Pounds of force | |
| Blades |
High‑carbon steel: 76×10 mm 3×0.375 in. Long: 610 mm 24 in. |
| Description | |
|---|---|
| Down force | |
| Size | |
| Spacing | |
| Angle adjustments |
| Type | |
|---|---|
| Wheels | |
| Tires |
| Description | |
|---|---|
| Additional feature | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 |
Accessories & Attachments
Hitch
For Category 2 and 2/3N Tractors with Quik-Coupler, order AR27093.
For Category 2/3N Tractors without Quik-Coupler, order one R64434 and two R66435.
For Category 2 and 2/3N Tractors with Quik-Coupler, order AR27093.
For Category 2/3N Tractors without Quik-Coupler, order one R64434 and two R66435.
Standards
Standards may be ordered to convert the machine for different operational requirements. In the sales manual, see tractor compatibility and equipment requirements for restrictions.
To convert from a 25-mm x 686-mm (1-in. x 27-in.) standard to a 32-mm x 838-mm (1.25-in. x 33-in.) standard, order N261789.
To convert from a 32-mm x 838-mm (1.25-in. x 33-in.) standard to a 25-mm x 686-mm (1-in. x 27-in.) standard, order N261788 and A25273.
Standards may be ordered to convert the machine for different operational requirements. In the sales manual, see tractor compatibility and equipment requirements for restrictions.
To convert from a 25-mm x 686-mm (1-in. x 27-in.) standard to a 32-mm x 838-mm (1.25-in. x 33-in.) standard, order N261789.
To convert from a 32-mm x 838-mm (1.25-in. x 33-in.) standard to a 25-mm x 686-mm (1-in. x 27-in.) standard, order N261788 and A25273.
Standards Attachments
Heavy-duty knife
Each knife is 610 mm (24 in.) long and will cut 267 mm (10.5 in.) on each side of the standard.
The 76-mm x 8-mm (3-in. x 5/16-in.) blades are sharpened on the leading edge.
Mole ball
The mole ball is used to make a tunnel drainage system. It requires BA24894 standard support attachment.
Standard support attachment
The standard support attachment is required to attach the mole ball to the standard. It also allows the frame to jackknife for automatic retraction and operation of the standard.