New FC15E Flex Wing Rotary Cutter

Specifications

Cutting width	4.6 m 15 ft
Cutting capacity (diameter)	50.8 mm 2 in.
Tractor PTO HP range	37 kW 50 hp
Transport width	At wing wheels: 2.8 m 9.1 ft
Deck thickness	11 gauge - 3 mm 0.12 in.
Side skirt thickness	3 gauge - 6 mm 0.24 in.
Approx. weight	2049 kg 4519 lb
Drivelines - Size - Main	CV ASAE Category 4, splined telescoping profiles
Blade tip speed - 540 rpm - 1000 rpm	540 rpm: 87.8 m/s 288 fps
Gearboxes	5-year warranty

Cutting width	4.6 m 15 ft
Cutting height	25.4-406.4 mm 1-16 in.
Cutting capacity (diameter)	50.8 mm 2 in.
Cutting chamber depth	254 mm 10 in.

Tractor PTO HP range	37 kW 50 hp
Tractor PTO	540 rpm
Static Vert Drawbar Load Rating

Type	Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
Category
Hitch width
Jack stand	Mechanical jack stand in base for all machines with hydraulically operated height, stays vertical while raising/lowering

Transport width	At wing wheels: 2.8 m 9.1 ft
Overall width	4.7 m 15.4 ft
Overall length	5.3 m 17.3 ft
Deck shape	Easy-clean smooth top deck
Deck type	Single
Deck thickness	11 gauge - 3 mm 0.12 in.
Side skirt thickness	3 gauge - 6 mm 0.24 in.
Hinges	Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
Approx. weight	1623 kg 3580 lb

Size	Main CV ASAE Category 4, splined telescoping profiles Connecting ASAE Category 4, splined telescoping profiles
Protection	Connecting No-seize, slip-clutch driveline

Number	Four
HP rating	Transfer Continuous: 186 kW 250 hp Peak: 224 kW 300 hp Center Continuous: 56 kW 75 hp Peak: 75 kW 100 hp Outer Continuous: 56 kW 75 hp Peak: 75 kW 100 hp

Thickness	13 mm 0.5 in.
Width	102 mm 4 in.
Type	Suction
Overlap	152 mm 6 in.
Blade rotation
Blade tip speed	540 rpm 86.6 m/s 284.1 fps
Material flow system
Blade holder	Type Round stump jumper for maximum protection for blade carrier against obstruction damage

Wing lift	Simultaneous
Wing flex	For transport: upward 90 degree (angle) Upward working angle: 45 degree (angle) Downward working angle: 22 degree (angle)

Type	Option 1 4-bolt, laminated: 21x5.25x9 Option 2 4-bolt, 16PR severe-duty ag: 21x7x12
Suspension	No suspension - rigid back axle
Row width adjustment	No
Wing-leveling adjustment	Easy adjust turnbuckle with bearing

Front	Single-row chain guard
Rear	Single-row chain guard

Gearboxes	5 years